
                                хинтс & типс

-------------------------------------------------------------------------------
*** жERSION 2.0 OF THIS PROGRAM IS COMPATIBLE WITH THE цOMMODORE рамDISK ж4.3
    AND HIGHER.  тHE рамDISK MUST BE INSTALLED BEFORE RUNNING жт100-128 ж2.0.
    вHEN YOU INSTALL THE рамDISK, SPECIFY паге 8 AS THE INTERFACE PAGE.
-------------------------------------------------------------------------------
*** жERSION 2.0 OF THIS PROGRAM DOES NOT SUPPORT 132-COLUMN DISPLAY MODE,
    DOUBLE HIGH/WIDE CHARACTERS, SMOOTH SCROLL, 'SPECIAL' OR INTERNATIONAL
    FONTS ('GRAPHIC' FONT IS SUPPORTED), NOR жт52 MODE.
-------------------------------------------------------------------------------
*** ыOU CAN ADJUST THE BAUD RATE BY TYPING <алт> м AND PRESSING '+' TO SLOW
    IT DOWN OR '-' TO SPEED IT UP.  жERSION 2.0 OF THIS PROGRAM SUPPORTS
    300/1200/2400 BAUD OPERATION.  иN ADDITION, и HAVE HAD EXCELLENT RESULTS
    WHEN TIED DIRECTLY TO A жаь AT 4800 BAUD, USING A BAUD RATE FACTOR OF 10.
-------------------------------------------------------------------------------
*** дIFFERENCES BETWEEN [ALT] т (DISPLAY DISK FILE) AND [ALT] д (DUMP BUFFER TO
    SCREEN):  [ALT] т WILL DISPLAY ESCAPE AND MOST CONTROL CODES IN REVERSE
    FIELD VIDEO BUT WON'T EXECUTE THEM. [ALT] д SCREEN DUMPS WILL EXECUTE THEM.
    аLSO, [ALT] д ASKS IF LINEFEEDS SHOULD BE FILTERED.  тHE RESPONSES ARE:
      ы= YES, STRIP THEM.  н= NO, LEAVE THINGS ALONE.  а= CHANGE цр TO црлф.
-------------------------------------------------------------------------------
*** тHE PROGRAM WILL CONDITION THE 1670 TO нот ансвер THE PHONE. иF YOU WISH
    TO SET THE 1670 TO аUTO-аNSWER, TYPE THE FOLLOWING: 'атс0=N' WHERE 'N' IS
    THE "RING COUNT" BEFORE THE 1670 WILL ANSWER. нOTE THAT ALL LETTERS IN THE
    ATTENTION COMMAND муст BE CAPITAL LETTERS.  рEFER TO YOUR MANUAL.
-------------------------------------------------------------------------------
*** уPLOADING тEXT VIA [ALT] у:
    тURN фLOW цONTROL офф WHEN UPLOADING VIA SERVICES SUCH AS тYMNET.  [ALT] -
    тURN фLOW цONTROL он  WHEN UPLOADING TO A HOST ON A DIRECT LINE.   [ALT] +
    фOR CONTINUOUS UPLOADS WHERE THE HOST ECHOES YOUR TRANSMISSION, A [ретурн]
    AS THE UPLOAD PROMPT (оPTIONS SCREEN, [ц=] о) WORKS BEST.  тHE UPLOAD
    PROMPT CAN BE DISABLED BY ENTERING <ESC> AS YOUR UPLOAD PROMPT FOR UPLOADS
    WHERE THE HOST DOES NOT ECHO YOUR TRANSMISSION.
-------------------------------------------------------------------------------
*** тHE FOLLOWING KEYS GENERATE THE асции CODES LISTED BELOW:

            [бRITISH #]          бACKSLASH             (DISPLAY CODES)
            [BACK ARROW]         уNDERSCORE
            [UP ARROW]           цARET
            [схифт] +            лEFT цURLY бRACE
            [схифт] -            рIGHT цURLY бRACE
            [схифт] бRITISH #    пIPE
            [схифт] UP ARROW     тILDE
            [схифт] *            гRAVE (BACK TICK)

            [стоп]               цтрл ц                (NON-DISPLAY CODES)
            [хоме]               цтрл с
            [црср уп/двн]        цтрл я
-------------------------------------------------------------------------------
*** хOW TO принт (OR цопы) THE хелп FILES:
      (1) лOAD ONE OR MORE FILES (жт100а/б/ц/д.хлп) INTO THE BUFFER VIA [ALT] ф
      (2) дUMP THE BUFFER TO THE PRINTER (OR DISK, IF COPYING) VIA [ALT] д.
          нOTE: оNLY сеяUENTIAL FILES CAN BE PRINTED.  бE SURE YOUR PRINTER IS
          PROPERLY CONFIGURED FOR асции OR петсции, AS APPROPRIATE.  тHE хелп
          FILES ARE петсции.  рEFER TO YOUR PRINTER MANUAL.  аLSO, SCREEN PRINT
          COMMAND [ALT] с WILL PRINT THE CURRENTLY DISPLAYED HELP SCREEN.
-------------------------------------------------------------------------------
*** хOW TO ADD YOUR OWN NOTES TO THIS FILE:
      (1) лOAD жт100д.хлп INTO THE BUFFER (сея FILE) VIA [ALT] ф.
      (2) тURN он THE BUFFER WITH [алт] б.
      (3) тYPE YOUR NOTE. (бE SURE THE TELEPHONE LINE IS DISCONNECTED FROM
          THE MODEM - USE фULL дUPLEX WITH 1670, хALF дUPLEX WITH 1660).
      (4) тURN офф THE BUFFER WITH [алт] б.
      (5) сCRATCH OR RENAME жт100д.хлп  (USE [алт] в FOR DISK COMMANDS).
      (6) сAVE THE BUFFER TO DISK AS A сея FILE NAMED жт100д.хлп WITH [ALT] д.
-------------------------------------------------------------------------------
